Metal Shot Blasting / Shot Blast Cleaning Machine 1000 * 2000mm Workpiece Size HGP1020-8 manufacturer from China WUXI ZHOUXIANG COMPLETE SET OF WELDING EQUIPMENT CO.,LTD

Metal Shot Blasting / Shot Blast Cleaning Machine 1000 * 2000mm Workpiece Size

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: HGP1020-8

HGP1020-8 Type Shot Blasting And Cleaning Machine With 1000×2000mm Work-piece Size
&

HGP1020-8 Type Shot Blasting And Cleaning Machine With 1000×2000mm Work-piece Size

1. Specifications:

Model	HGP1020-8
Width × height	≤1000×2000mm
Length	3000-15000mm
Quality requirement	Sa2.5, Ra15-50
Impeller head (8)
Model of impeller head	Q034II
Quantity of shot-blasting	8×200kg/min
Turning speed	2950r/min
Shot blasting speed	65-70m/s
Power of shot-blasting machine	8×11KW
Work-piece conveying system
Length of input roller conveyer	15000mm
Length of output roller conveyer	15000mm
Load capacity of roller conveyer	1000kg/m
Conveying speed	0.4-4m/min
Shot conveying system
Capacity of shot conveying	120T/h
Longitudinal screw conveyor
Driving power	5.5KW
Power of bucket hoister
Driving power	7.5KW
Hoisting speed	1.5m/s
Hoisting capacity	120T/h
Power of curtain separator
Driving power	5.5kw
Width of curtain	2000mm
Steel shot diameter	1.2-1.8mm
Model of dusting system	LMF-I
Discharge quantity	120mg/m3
Wind speed of the gate	5m/s
Handling volume of dusting system	18000m3/h
Quantity of filter core	18
Filtering area (18×20)	360
Centrifugal ventilator Model	4-72-5A
Centrifugal ventilator air volume	18000m3/h
Centrifugal ventilator wind pressure	2022 Pa
Centrifugal ventilator power	15kw
Cleaning system ventilator power	15kw
Overall power	≈140Kw
Whole machine air volume	18000m3/h

2. Description:

Guard late in the shot-blasting chamber and nut are vulnerable parts, the wear abrasion should be always checked and changed in time. Pay attention to the splicing when install the guard plate to prevent damaging the wallplate and danger.

Rubber curtain on the exit and entrance of auxiliary chamber are vulnerable parts, if damaged, you should repair or change in time to prevent the overflow of shot and dust.

Men should keep away from the entrance and exit of chamber when working to prevent shot splash into eyes, and warn with board.

When check inside the cleaning chamber, you should cut off power first and warn with board, strictly prohibit operate with electricity, or you’ll be dangerous.