H Beam & Box Beam End Face Milling Machine With 1500 * 2000 mm Work-piece Size

1. Specifications:

a. Model: DX-1520

b. Horizontal processing size: 2000 mm

c. Vertical processing size: 1500 mm

d. Motor power of horizontal transmission:4/3KW (rotate speed is 1500/960rpm)

f. Quick return speed horizontal transmission:660mm/min

g. Motor power of vertical transmission:1.5KW (rotate speed is 1500rpm)

h. Elevating speed of vertical transmission: 55-500mm/min

i. Model of milling head: 1TX40

j. Motor power of milling head: 7.5KW

2. Description:

Model DX1520 face milling machine is composed of horizontal driving, horizontal sliding table, vertical driving, vertical rotating sliding table and electrical control system.

The  horizontal driving is composed of table, horizontal feed motor, speed reducer, horizontal driving screw mandrel and screw nut. The table adopted welding structure and through annealing, and then through rough process and precision process. Its characteristics: high strength, little deformation, reasonable structure and good technology; one good load capacity rectangle track and one precision V-type track.

Horizontal driving mechanism is composed of feed box, trapezoidal feed screw driving and support frame; feed box adopted double speed motor, each used for horizontal feed and horizontal quick forward and backward during milling process; feed screw driving use drive and idle screw nut to guarantee the precision of horizontal driving; the two screw nuts fixed on the screw nut base frame at the same time, the screw nut base frame is connected with horizontal sliding table which drive the sliding table moving forward and backward along the track.

3. Goods Supply range and components